So I just bought a Gotek drive and am waiting for it to arrive. What's the best firmware and why? From what I can see, there's 3: - Cortex - FlashFloppy - HxC Cortex seems to get the thumbs down from everyone, and being unmaintained doesn't help, so I assume that's out. HxC looks like it has support for everything, but has a price tag attached.

Other than file format support, does one firmware have advantages over the other? Educate me and thanks! FF and HxC are pretty comparable in my experience of using both.

Old military rangefinders

I use both on seperate goteks. Jeff has done fantastic work on hxc so I enjoy using it for the most part - however I also have a flash floppy gotek that comes in handy since I don't like to transplant my hxc gotek around when it's living in an Amiga I'm frequently messing with.

I also use an Atari st and Atari falcon and my flash floppy lives there most of the time. Originally Posted by solidcore. I'd also say that FF and HxC are quite similar depending on what your needs are. Originally Posted by AmigaBoy. Forget about Cortex, it's gone, dead, no one should pay attention to it.

Both HxC and FlashFloppy are great. HxC has been around for longer and supports more machines at the moment. FlashFloppy is open source and free. Pick your poison, they're both great.

Jeff, stop being pissy. Find More Posts by Akira. I think it's going to be FlashFloppy right now. I really only need ADF support, and free is appealing to me. Originally Posted by Akira. Jeff, since you're here, maybe you can answer a question I've been thinking about. Is it possible to implement HDF files into the firmware so a Gotek can theoretically boot a HDD instead of just a floppy, or is the Gotek hardware limited to floppies only? If that's the case, is it possible to fool the hardware into thinking the HDF is just a huge floppy?

To boot from this i think that you need to patch the kickstart.

flashfloppy firmware update

Very cool! Originally Posted by demolition. Is that a limitation set by the Gotek hardware or is that a firmware issue? Neither - but since the Gotek is connected to the floppy controller in the Amiga, the data speed will also be limited by what this controller can handle and it cannot go any faster than a regular floppy.

The main problem is that someone needs to write such a driver for the Amiga, and no one is going to do that.

Gotek Compatibility

This has been discussed before, FlashFloppy could also support such a thing if an Amiga-side driver existed. I can't moderate myself when i see some comments. This leads to very annoying feature of amiga scene. Everything should be free and if any one ask something from anything he is a villain. Price of HxC firmware is not a worth of mention for adult.Two gave their lives to become one.

HxC Floppy Emulator download page

Download the software from ST Microelectronics. You will need to provide an email address and you will be emailed a link.

Install the software. Take the FlashFloppy. Open DFuseDemo from the Start menu. Accept this. Put in your host device and power up. Issue — From Keir: The bootloader can get confused at power on and detect the wrong baud rate, so this is a way to reset it without reconnecting power and USB and upsetting the rest of the connection. Issue — from Squirrel in comments below: USB cable and hubs can cause issues with device recognition, perhaps due to power connection in USB cable.

Problem solved. Thanks to Squirrel for this one! Thanks for the excellent description. I was able to successfully repeat the procedure on my Gotek, which had been flashed previously with Cortex firmware ie. I cannot however say that it worked like a charm. It seems the drive is sensitive to its power supply. I measured the cable to make sure all conductors where connected 1-to-1 before plugging it in.

It was only then that I got the idea to use the 3rd connector on my cable. And hey presto! My drive was recognized, although still not as a DFU device. I hope my comments will help other people when they run into problems following this flashing guide.

The reason I had doubts is that in the past, I had similar problems flashing other devices, which could be solved by using the hub to force USB2. Thanks for this guide! I wanted to share my experience. I bought the cheapest Gotek on Amazon: less than 14 EUR shipped for a super-basic model that came with no display at all and no buttons. I put together an A-to-A cable, and set on to follow your instructions. My Win 7 could not install the drivers automatically, but those shipped with the ST software worked.

The first time I actually flashed the firmware, I was prompted if I wanted to remove the existing write protection of course I accepted. At the end of the process, I got a warning window with a bunch of info on it.GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together. If nothing happens, download GitHub Desktop and try again.

Firmware Update

If nothing happens, download Xcode and try again. If nothing happens, download the GitHub extension for Visual Studio and try again. FlashFloppy is a floppy-drive emulator for the ubiquitous Gotek hardware. Connect to retro machines just like a real floppy drive but use disk images on a modern USB stick! FlashFloppy is a labour of love: working on it takes a lot of time and effort. For further information please see the Donations page.

The source code, and all binary releases, are freely redistributable in any form. This means, for example, you are free to sell and profit from Gotek devices programmed with a binary release of FlashFloppy. For example:. Skip to content. Dismiss Join GitHub today GitHub is home to over 40 million developers working together to host and review code, manage projects, and build software together.

Probiotics for pigeons

Sign up. Floppy drive emulator for Gotek hardware.

Nevada highway patrol scanner

C Other. Branch: master. Find file. Sign in Sign up. Go back. Launching Xcode If nothing happens, download Xcode and try again. Latest commit.The most unreliable part of the MSX is probably the floppy drive. The drives are getting old and unreliable. They can be replaced with pc drives but a nice alternative is a Gotek drive. The Gotek drive emulates an floppy drive. It connects to the floppy cable just like a regular pc floppy drive.

So if the MSX is able or converted to use pc floppy drives, it can also use the Gotek drive. Instead of floppies it uses a regular USB flash drive. By default the Gotek comes with 7 segment display on which you can see the number of the image selected with the buttons on the Gotek.

flashfloppy firmware update

It is possible to replace this with a lcd or oled screen so you can see the filename of the image selected. It is also possible to connect a speaker to emulate the stepping motor sound for those who miss it. The standard firmware on the Gotek is not very useful, but luckily there are alternatives.

First there is the HXC firmware. Alternatively there is the open source FlashFloppy firmware. With the FlashFloppy firmware it is possible k and k dsk images directly from the USB flash drive. Because it connects to the floppy controller in the MSX is also emulates the actual speed of the floppy drive. This means it's pretty slow compared to using floppy images with a mass storage device like the MFR of Carnivore. However it is a lot cheaper and it also supports most perhaps all?

FlashFloppy firmware sounds very interesting to me Especially if it really can be used to play KB and KB DSK-files directly without need for renaming or converting, it seems well worth a try considering the price of the devices.

New version V Just tried it my self with flashfloppy V I realy don't see whats wrong. They seem to have the wrong mediacode. See here So it will probably work if you change the F9 in F8 in the bootsector with a hex editor. Thanks Philip, i will give it a try. If it works i create a small program to update the whole collection. Unfortunately, it doesnt seem to be that simple Effect stays the same.

I think more needs to be changed. I also changed the numer of sides on the second try. When i say dir or files the first part is shown, then a read error is given. When i change the switch on the interface to kb the last part is garbage with the files command.Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles. Be very careful when updating your BIOS!

Download the version to which you want to update. Extract the contents of that file. You then restart your computer and boot from the USB drive.

Kagome and shippo mate fanfiction

In the minimal DOS environment that appears after the reboot, you run the appropriate command—often something like flash. Look for a file with the. In the past, this process was performed with bootable floppy disks and CDs. Some manufacturers provide Windows-based flashing tools, which you run on the Windows desktop to flash your BIOS and then reboot.

Any system crashes or freezes might also result in a corrupted BIOS. The Best Tech Newsletter Anywhere. Joinsubscribers and get a daily digest of news, comics, trivia, reviews, and more. Windows Mac iPhone Android. Smarthome Office Security Linux. The Best Tech Newsletter Anywhere Joinsubscribers and get a daily digest of news, geek trivia, and our feature articles.

Skip to content.

flashfloppy firmware update

How-To Geek is where you turn when you want experts to explain technology. Since we launched inour articles have been read more than 1 billion times. Want to know more?FlashFloppy - new firmware for Gotek drives, open source. Originally Posted by kaffer.

New minor release update: v0. Last edited by Akira; 14 November at Find More Posts by Akira. Can anybody compile this and make binaries to share? I don't have the means but I am willing to test this on my Gotek right away.

Flash Floppy

Those are some great news! I had seen this at the facebook group, I'll try to give it a go too, but like you I'd need the binaries to test it. Find More Posts by Shatterhand. Originally Posted by Akira. Good stuff! The binary is on the Facebook page. And the best way to program is via male-male USB cable. I have to look after the toddler, but if I get time and no one else has posted it I will post up the info and files.

Originally Posted by Higgy. Last edited by Akira; 21 July at First to feature!

Last edited by Neil79; 21 July at A lot of us don't really do Facebook, would be great to have binaries available on the git repositories, but in the meantime, let's have them here. I had to guess which group it was, went and grabbed the binaries posted by Keir, and now I attach them here for everyone. Hopefully I can test this on the weekend!

Will have to test. Spo not sure if the firmware is currently fully compatible with Amiga and Atari ST selectors. I supply my own build of the amiga selector so please use that. Other platforms use the hxc one. I have now flashed this new firmware over my Cortex firmware. Last edited by Higgy; 21 July at The MEGA link isn't a link. Last edited by Sinphaltimus; 21 July at Got to do something else so sorry I can't help further tonight.

HEX in the FlashFloppy. ZIP needs to be converted into a. DFU but the included software in the Installation Software will do this. I had to manually browse to the drivers and install them after the Installation program was installed. CFG No need to convert.When instructed to press both buttons, press Prev and Next.

You may alternatively press Select, or the rotary encoder, if you have them. The main bootloader can also be updated by USB stick. Note that it is important for this operation to succeed, otherwise the Gotek will require a full reflash by following the steps in Initial Programming. Therefore make sure the Gotek has a stable power supply and a known good USB stick. New features and bugfixes are rare.

In general you do not need to update the bootloader and can skip these steps. In the extremely unlikely case that an error occurs during update, "ERR" will be displayed. At this point the Gotek will require a full reflash as the old bootloader has been erased.

Skip to content. Firmware Update Jump to bottom. If you have previously flashed the full firmware, you can make future updates via USB stick. Insert the USB stick into the Gotek and power on with both buttons pressed. Release both buttons. The latest firmware will be programmed and the Gotek will reboot into it. The latest bootloader will be programmed and the Gotek will reboot into it. Remove the USB stick and follow the steps for normal firmware update.

Pages You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window.

thoughts on “Flashfloppy firmware update

Leave a Reply

Your email address will not be published. Required fields are marked *